Mirage crank shortener aluminium, including stainless steel bolts, silver

The crank shortener makes a difference in length of 2.5 or 5 centimeters.

Mounting:

This set consists of blocks with left and right thread. Place the correct shortener on the crank and screw it tight with the stainless steel bolt. 3 sizes of threaded ends are included. Choose the right size and screw the bolts tight until the block can no longer move.

Place the pedals in the crank shortener at the desired height. If the thread of the pedal is longer than the thickness of the shortener, the spacers must be used. The set contains:

The set contains:
- 2 aluminum crank shorteners left and right thread
- 2 stainless steel bolts left and right
- 4 rings
- 4 threaded ends: 4x 7mm / 4x 11mm / 4x 13mm

Suitable for:
- Pedals with 9/16 thread (most common)
- Width crank arm from 26 to 38 mm