Cyclus dual disc mount facing tool IS2000, Postmount and flatmount
Cyclus Tools dual disc mount facing tool IS2000, Postmount and Flat Mount
The dual disc mount facing tool can be used universally by simply changing the facer and clamping position. It mills 100% even, at a 90° angle. The exact 90° angle and the parallelism of the disc brake mounts are ensured by the fact that the facer is clamped only once and both disc brake mounts are milled simultaneously.
This is the only way to guarantee an absolutely identical milling depth, which is a prerequisite for the correct assembly and proper functioning of the disc brake. Before you clamp the face milling machine, you must check the parallelism of the dropouts, as only then a perfect milling of the disc brake mount is guaranteed.
• The tool is delivered in the standard configuration for the quick release (QR) and 20 mm thru axle.
NB: an adapter is needed to use the face milling tool with a 12 mm or 15 mm thru axle, that is Cyclus Tools art. 7720962
• This tool comes with a facer pair Flat Mount (spare parts): art. 7720958
Flat Mount Front
- for front disc brake / front brake caliper mount
- according to flat mount standard
Flat Mount Rear
- for rear-wheel disc brake / rear brake caliper mount
- according to flat mount standard
Post Mount
- for disc brake / caliper mount
- according to postmount standard
- Diameter of the brake disc 140-203 mm
- (nominal size: 5-8 inches)
International Standard 2000 (IS2000)
- for disc brake / caliper mount
- according to IS2000 standard
- Diameter of the brake disc 140-203 mm
Optional accessories:
- Cyclus Tools milling cutter pair (Ø 12 mm, height 15 mm) Art. 7720237
- milling cutter pair with carbide plates for carbon fibre Art.-Nr. 7720238
- guide for quick release (QR) VR item number 7720960
- guide for quick release (QR) HR item number 7720961