IceToolz Repair Kit for Crankarm thread, #E521
IceToolz crank arm thread repair kit
This IceToolz crank arm repair kit is a professional set for repairing the threads in the crank. The thread repair should be done carefully, you will find a movie with correct explanation below in the text. This professional set is suitable for 10 thread repairs with Helicoil® (5 left and 5 right thread). This thread repair set consists of:
- 1 wrench with Helicoil® guides
- 5 left and 5 right Helicoil® front crank (E521H)
- 2 taps (1 left and 1 right thread 9/16”) for Helicoil® (E521T)
- 1 Helicoil® screw-in aid
- cleaning brush
- thread cutting fluid (C143)
The IceToolz part number of this thread repair kit is E521.
IceToolz thread repair kit for crank arm, the rescue for expensive or rare (retro) cranks
This thread repair kit shows the top quality of IceToolz. A very professional and comprehensive set. This repair kit is ideal for replacing or reinforcing the wire of the pedals. Usually this thread is tapped into the crank, especially with the older, retro models that are sometimes irreplaceable. Placing a Helicoil® is the solution. This is simple, but the job must be done accurately.
The thread tappers are equipped with 2 types of thread, the first cleans up the existing thread of the crank and then the real work begins. The thread for the Helicoil® is tapped into the crank. Make sure that sufficient cutting fluid (C143) is used.
After the Helicoil® wire has been cut into the crank and the crank has been cleaned of the cutting residues, the correct Helicoil® can be placed. Be aware of the difference between left (black) and right (gold). First screw the Helicoil® into the conductors located in the wrench of the thread repair kit. Then screw the Helicoil® into the crank. Break off the crossmember with needle nose pliers (28L2) and the crank arm is ready for mounting a pedal.
Watch this video for proper use of this thread repair kit.
IceToolz: the choice of professionals and do-it-yourselfers!