IceToolz Derailleur Hanger Alignment Tool, #E355

IceToolz derailleur centering tool, derailleur hanger adjuster

This IceToolz derailleur hanger adjuster is an easy to use tool for measuring and straightening the derailleur hanger. The derailleur hanger adjuster is made of a combination of different materials and is therefore easy to handle and very functional. The IceToolz article number of this derailleur hanger adjuster is E355.

IceToolz derailleur hanger adjuster, for smooth shifting after a fall

This derailleur hanger adjuster is a measuring and aligning tool in one. You screw the extension of the orange rod (1) into the derailleur hanger. Then measure the distance to the rim at various points with the pin in the sliding block of the pad aligner (2). As can be seen in the video, it is useful to always measure at the valve, in order to prevent measurement errors due to a stroke in the wheel. By now comparing the distance from the pin to the rim at various places, it is possible to check whether the derailleur hanger is parallel to the wheel. If this text is difficult, it is certainly advisable to watch the video, see link below. If the path turns out not to be parallel to the rim, it can be oriented by bending it with the orange bar. NB: Do not use the aluminum measuring part for this!

Watch this video for proper use of this derailleur hanger adjuster.

IceToolz: the choice of professionals and do-it-yourselfers!